Advanced Wrinkle Recovery Treatment

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
77.25

EDETA BD (BASF) (Disodium EDTA)
0.05

Pluracare E 400 (BASF) (PEG-8)
3.00

Euxyl PE 9010 (schulke & mayr) (Phenoxyethanol (and) ethylhexylglycerin)
1.50

Neutrol TE (BASF) (Tetrahydroxypropyl ethylenediamine)
0.05

Phase B

Cosmedia Ultragel 300 (BASF) (Polyquaternium-37)
0.75

Phase C

Emulgade PL 68/50 (BASF) (Cetearyl glucoside (and) cetearyl alcohol)
1.00

Cremophor A 6 (BASF) (Ceteareth-6 (and) stearyl alcohol)
0.35

Cremophor A 25 (BASF) Ceteareth-25
0.35

Cutina PES (BASF) (Pentaerythrityl distearate)
0.50

Cetiol C 5 (BASF) (Coco-caprylate)
4.50

Cegesoft PS 6 (BASF) (Vegetable oil)
2.50

Phase D

KSG-16 (Shin-Etsu) (Dimethicone (and) dimethicone/vinyl dimethicone)
1.50

Xiameter PMX-9027 Fluid (Dow Corning) (Cyclopenta-siloxane (and) dimethiconol (and) domethicone crosspolymer)
1.50

Xiameter OFX-0190 Fluid (Dow Corning) (PEG/PPG-18/18 Dimethicone)
1.00

Phase E

Deionized water
4.00

Myoxinol (BASF) (Hydrolyzed hibiscus esculentus extract (and) dextrin)
0.20

Procedure

Combine phase A in main beaker under high prop mix. Add phase B, disperse and swell completely. Combine phase C in side beaker. Begin heating under very slow prop mix. Heat phase A and C to 75-85°C under high speed prop mix. At 80 C, add phase C to A slowly, when uniform mill in phase D. When uniform, move to slow sweep and begin cooling. Below 40°C, move back to mill and add phase E until uniform. Move back to sweep and drop below 30°C.